( 1) Exactly how to make the mold and mildew life longer?
With the continual intro of wood pelletizer maker right into the market, the development of mechanical devices is additionally continuously transforming. The damage of the mold and mildew throughout the production of timber pellets is additionally a major cost. So, exactly how to preserve it straight influences the life span of the wood pellet making machine. For that reason, it likewise straight affects the processing expense of timber pellets. Exactly how to make the mold and mildew life of the wood pelletizer equipment machine longer? Get your response today!
Related post: wood pelletizer machine
① Frequently tidy oil and also fill
If the timber pelletizer device is not utilized for a month, it is suggested to cleanse the oil inside, so the oil will gradually solidify throughout long-term storage space, which will make it challenging to eliminate the following time it is utilized, which will seriously affect the succeeding use of the mold and mildew of timber pelletizer device.
After the pellets are refined, it is needed to use oil to grind for a period of time to ensure that all the oil remains in the die hole, which is of great advantage to the work the following day as well as is also for the lasting use of the die. The oil can be blended with waste engine oil and also wood chips. It can be made when and also can be reused.
② No requirement to clean up the mold for a very long time
If the mold as well as squeeze rollers are no longer made use of for a long period of time, it is recommended to eliminate the mold and mildew after cleansing and storage. The master cleanses the sawdust pellets inside the mould and also follows the mould surface area. By doing this, on the one hand, we can avoid the business from being tough to eliminate the pellets because of the hardening of the pellets due to the long-term storage space of the students. On the other hand, because the sawdust has water absorption, if the sawdust on the surface is not eliminated, it may speed up the development of the deterioration of the mold and mildew surface area.
Related post: wood pellet processing plant
③ The mold ought to be kept in a completely dry and ventilated area
Most of the molds of the wood pelletizer machine are made from alloy steel. If they are in a moist place for a long time, the surface of the mold may be harmed because of air corrosion, therefore significantly lowering its service life.
④ The taking care of procedure ought to be careful
The mold of the timber pelletizer device is a high-precision component, as well as the mold opening is very carefully processed according to the compression proportion of the mold. If you are careless throughout the handling procedure, the structure of the internal wall surface of the mold opening is harmed, which may cause molding during processing. low rate and also brief service life.
The above are the pointers on just how to make the mold life longer for wood pelletizer maker Comply with these 5 approaches to maintain the mold, as well as I believe your mold will certainly last much longer.
Related post: 2-2.5T/H Wood Pellet Plant in Germany
( 2) Why do the pellets produced by the wood pellets equipment have a negative appearance?
Why do the pellets produced by the wood pellet mill equipment look bad? Today we will certainly learn why. Throughout the production of timber pellet gas by the wood pellet manufacturing device, there will certainly be a circumstance where the pellets contain powder and have a rough surface area. Currently, it is additionally necessary to check the devices information settings of the timber pelletizer maker. Besides, what is the factor for this sensation?
Wood pellets cause more wood pellet powders, this feedstock can be triggered by reduced dampness content, the wetness content of timber pellet maker feed is usually in between 12% and also ~ 15%. After changing the dampness content of the raw material, the trouble still exists, that is, the pressure roller die is seriously used. When the inner surface area of the ring die of the timber pelletizer device is drastically worn or the bit size requires to be transformed, it requires to be changed. The surface area of the sawdust pellets is rough, which may be caused by the excessive wetness content of the raw product, or the initial use of the mold. This problem can be resolved by adjusting the wetness content of the raw material, or by consistently grinding the mold with the material.
Related post: automatic cat litter machine
To summarize, the reasons that the pellets created by the wood pelletizing maker are not good in appearance are stated today. I wish it will aid you when you make use of the wood pellet machine again. Over the years, Richi Equipment has actually concentrated on the research and development and production of wood pelletizer machine devices, biomass pellet machines, sawdust pellet machines, gas pellet makers, timber processing devices, drying devices, cooling equipment and also packaging devices.
( 3) Advised wood pellet machine.
There are numerous timber pellet mill machine on the marketplace. Today, Richi Equipment will recommend some of them:
Related post: biomass pellet plant manufacturers
① The initial kind of small timber pelletizer machine
It is a brand-new type of biomass energy equipment individually developed by our firm’s technical personnel and also has independent copyright rights. The wood pelletizer device is basic in structure, simple to operate, stable in operation, and also can function continually. The pressed pellets have the advantages of high thickness, high burning value, low wetness and reduced ash web content. The timber pellet maker machine gearbox adopts high-precision gear transmission, 4 collections of equipments are connected, and also the hydraulic oil distribution system can instantly circulate oil in between the transmission as well as the main shaft bearing. The service life of the primary shaft and also transmission gears.
The working parts of the wood pelletizer equipment die plate, stress roller) are made of alloy steel, and the solidity after heat treatment can reach more than 50, which makes certain the continual operation of the machine as well as extends the life span of the entire timber pelletizer maker The electronic control system of the major engine adopts the worldwide typical configuration of star-delta starting, as well as the procedure is very secure.
Related post: https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html
② The 2nd sort of little timber pelletizer machine.
Primarily ideal for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds as well as various other plant stalks as well as factory wastes. It appropriates for low temperature level granulation of biological bacterial plant food, natural fertilizer and also compound fertilizer.
Attributes of this timber pelletizer equipment:
Related post: sawdust pelletizer
① The pressure rollers are evenly distributed, as well as the procedure is secure. At the same time, journalism location is increased, and also the manufacturing effectiveness is enhanced.
② The screw center pressure managing structure is adopted, and the wood pelletizer equipment mold void can be large or little, which is suitable for various products to ensure the pressing impact.
③ This version is furnished with Φ6-Φ10mm size molds, which appropriate for granulation of different products and accomplish the best advantage.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com